BACHARACH MGS-550 Ammonia Gas Detector

Previous 4 / 12 Next

BACHARACH MGS-550 Ammonia Gas Detector Fixed Gas Leak Detector BACHARACH MGS-550 Ammonia Gas Detector Fixed Gas Leak Detector BACHARACH MGS-550 Ammonia Gas Detector Fixed Gas Leak Detector
Quantity
Add Quotation


Industrial Refrigerant Gas Detector
  • Flexible two-sensor capability, local and / or remote
  • One user-interface platform for all sensor types
  • Two analog outputs and Modbus RTU interface
  • Three fully configurable, user-assignable relays
  • Magnetic wand enables easy, non-intrusive configuration / calibration
  • IP66 ABS or aluminum enclosure options

Description

Bacharach’s advanced MGS-550 gas detector can utilize any combination of sensor technologies, including electrochemical, semiconductor (MOS), catalytic bead or infrared, in a single platform for unparalleled detection capability. The MGS-550 can easily be connected to any central control system using the current and volt analog output or the Modbus RTU interface. With three user assignable relays, it can also function as a stand-alone unit without the need to wire alarm devices back to a central system.

The straightforward menu structure is identical throughout the platform reducing the amount of training required for installing and maintaining this product family. At any point in time, the instrument can be upgraded from a one sensor to a two sensor system by simply registering another sensor. The MGS-550 is furnished with two analog outputs which can be assigned as redundant for one or for transmit the signal of two sensors.
 

Specifications

Type

Gas detector using Semiconductor, Electrochemical, Infrared or Catalytic Bead sensor.

For one or two sensor configuration

Gases

Toxic gases:

Ammonia, Carbon Dioxide, Carbon Monoxide, Chlorine, Ethylene, Fluorine, Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Sulfide, Nitrogen Dioxide, Ozone, Sulfur Dioxide, VOCs and Oxygen

Combustible gases:

Methane, Propane, Butane, LPG, and Hydrogen

Refrigerants:

Ammonia, Carbon Dioxide, Hydrocarbons, and HFCs, HCFCs, CFCs

Measuring Range

O2

CO

H2S***

NH3*,***

CO2

Refrigerants

Combustible Gases

H2

C2H4

VOC

CI2**

F2**

HCI**

SO2***

NO2***

HCN***

O3**

30 Vol%

1,000 ppm

100 ppm

100/1,000/5,000/10,000 ppm/100 %LEL

5,000/10,000/20,000/30,000/40,000/50,000 ppm

1,000 / 10,000 ppm

100 %LEL

10,000 ppm

2,000 ppm

1,000 ppm

10 ppm

1 ppm

10 ppm

10 ppm

20 ppm

30 ppm

1 ppm

Display

5-digit, 7-segment red LED and green status LEDs

Output

Analog

4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V

Digital

Modbus RTU via RS 485

Power Supply

19.5 to 28.5 VDC or 24 VAC ± 20%; 3- or 4-wire

Relay

3 relays, SPDT, user assignable

Rating 1 A @ 24 VDC, 0.25 A @ 240 VAC, resistive load

Alarm delay 0 to 15 minutes; user-programmable

Ambient Conditions

Temperature

- 40 to +120 °F (40 to +50 °C)

Humidity

5 to 90 %RH, non condensing

Altitude

0 to 10,000 ft (3,050 m)

Enclosure options

Explosion-proof: Powder coated, copper free aluminum, with four M20 x 1.5 ports
General Purpose: IP66 Rated ABS with four M20 x 1.5 ports

Size (w x h x d)

General Purpose: 8.3” x 8.9” x 3.4” (210 x 225 x 85 mm)
Explosion-proof: 4.9” x 7.5” x 3.5” (125 x 190 x 90 mm)

Weight

General Purpose: 2 lbs (1 kg)

Explosion-proof:  3.5 lbs (1.6 kg)

Approvals

CE, UL, CSA, IEC, EN 61010-1

II 2G Ex d IIC Gb; XP enclosure only

*Ammonia available as low temperature version -40°F / -40°C (not for 5,000 ppm electrochemical sensor)

**Not IP66 rated; not available for XP enclosure

***Not available for XP enclosure

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Contact Us


Only allowed jpg, jpeg, doc, docx and pdf with 2MB maximum filesize.
Switch to Mobile Version
Subscribe Newsletter